Aquaboost Aquabreak AB5
£1,150.00 Excl. VAT
10 in stock
The AQUABREAK AB5 Cat 5 booster set is a complete, all-in-one unit, single outlet booster set incorporating single pump, pressure sensor, controller, control vessel, non-return valve and a 5 litre (nom) break tank fitted with a 1/2” solenoid valve and strainer.
The AQUABREAK AB5 Cat 5 booster set is a complete, all-in-one unit, single outlet booster set incorporating single pump, pressure sensor, controller, control vessel, non-return valve and a 5 litre (nom) break tank fitted with a 1/2” solenoid valve and strainer.
The electronic controller ensures that the pump starts automatically when water is consumed and stops automatically when the consumption ceases. In addition the controller protects the pump in case of faults.
- Automatic pump operation via electronic controller
- Back flow prevention to fluid category 5
- Pump dry running/no water protection
- Fully packaged for simple wall mount installation
- Flow rates up to 26 l/min
- 5 litre (nominal) break tank
- Simple installation and set up
- Durable Stainless steel enclosure
- Small unit profile
| Product Code | 62006 |
| General | |
| Warranty | 2 years |
| Conformity certification | UKCE / CA |
| Features | |
| Pump control system | Fixed speed (via electronic controller) |
| Pump control mode | Duty |
| Dry run protection | |
| Wall mounted | |
| Back flow prevention | Category 5 |
| Break tank capacity (nominal) | 5 litres |
| Performance | |
| Pump operating pressure | 2.0 bar |
| Pump operating pressure (closed valve) | 4.5 bar |
| Pump flow (maximum) | 0.43 l/sec |
| Pump flow (nominal) | 0.25 l/sec |
| Max pressure of use | 6 bar |
| Max water temperature | 35°C |
| Minimum Incoming mains pressure | 1 Bar |
| Maximum static outlet pressure | 6 bar |
| Connections | |
| Incoming connection (solenoid) | ½” BSP F |
| Outlet to system | 22 mm compression |
| Overflow | 22 mm |
| Pump | |
| Pump type | Peripheral |
| Pump body | Brass body |
| Impeller | Brass Impeller |
| Mechanical seal | EPDM / PTFE / Al. Oxide |
| Electrical | |
| Power supply / phase / frequency | 240 V / 1 Phase / 50 hz |
| Current – full load | 6 amps |
| Power consumption | 555 watts |
| Physical | |
| Enclosure protection | IP54 (304 stainless steel) |
| Width (with connections) | 617 mm |
| Width (without connections) | 312 mm |
| Depth | 206 mm |
| Height | 700 mm |
| Weight | 12.5 kg |